July 20, 2024

LED Neon Flex

LED neon flex is an alternative to traditional glass tube neon. It is a safe, clean, and cost-effective lighting solution that can be cut to the desired length.

When cutting neon flex, it is important to use a sharp tool to avoid damaging the internal wires. You should also have the correct tools on hand to close any exposed circuits.

Low Energy Consumption

LED neon flex is an innovative lighting type that resembles traditional glass neon lights but uses safer and more convenient LED technology. They are available in a wide range of colors and can be cut to custom lengths for your project. They are also incredibly energy efficient, using only 1.2 watts per hour. This means they will save you a lot of money on electricity costs over time.

Unlike conventional glass neon strips, LED flexible neon is fully encapsulated and requires no harsh gases or finicky transformers. Instead, they use state-of-the-art LED strip lighting and high-quality Flexible Neon Light Strip silicone molding to create an even glow with no visible dots or hot spots. This makes them ideal for outdoor, indoor, and commercial applications.

Flexible neon flexes can be installed using clips, aluminum mounting channels, and pre-fabricated settings. You can also choose a dimmable option to control the brightness of your lights with a handheld or wall switch. This makes them a great choice for restaurants, bars, and retail stores.

You can find LED neon flexes that are 3D bendable in both vertical and horizontal directions, which is ideal for curved path lighting. However, you should be careful not to bend them excessively or apply excessive force during installation. Moreover, you should select a product that is suitable for your needs and budget.

Easy to Install

LED Neon Flex is a flexible, energy-saving strip lighting solution that can be used indoors and outdoors. It’s perfect for creating eye-catching signage, commercial building facades, and even home lighting projects. The pliable LEDs can be shaped into tight curves or long straight lines, allowing you to create a unique lighting setup that complements your space.

Before installing your LED Neon Flex light strip, it’s important to carefully consider the surface you will be attaching it to. Ideally, the surface should be smooth and free of dust or rough textures to ensure a strong adhesion. You should also choose a location that will provide adequate heat dissipation and avoid direct sunlight.

Once you have decided where to install your neon flex, the next step is to measure your desired length. You can use a tape measure to determine the exact length you need and ensure that there are no cuts in the middle. You should also note the watts per foot rating to select a power supply that can handle your LED strips’ load.

During the installation process, it is essential to make sure all connections are secure and insulated. This will protect your lights against potential damage and extend the lifespan of your LEDs. To do this, you can use a silicone sealant or heat shrink tubing to connect the power cable to the LED strip.

Durable

LED neon flex lights are a flexible lighting solution that mimics the appearance of traditional glass tube neon signs. They LED Neon Light Manufacturer utilize LED technology and flexible silicone housing to create a neon-like lighting effect, while providing superior durability and energy efficiency. Additionally, they are much safer to use and operate than traditional glass neon lights. These features make them a great choice for commercial and residential spaces alike.

These lights are shatterproof and water-resistant, making them perfect for indoor and outdoor installations. They can be used to illuminate commercial signage, accent walls, or add a pop of color to interior decor. They can also be integrated with smart home ecosystems like Apple HomeKit and Samsung SmartThings.

In addition to being able to bend into different shapes, these lights are also waterproof. Having an IP67 rating means that they can be submerged in water for up to 30 minutes. This makes them ideal for outdoor lighting, especially in rainy or snowy areas.

In order to ensure that your flex neon strip is as durable as possible, you should avoid bending or pulling it excessively. In addition, you should always disconnect the flex neon from power before cutting it. To get a clean cut, you should use a utility knife or box cutter and be careful not to damage the internal wires.

Easy to Customize

With a variety of colors as standard, LED Neon Flex lighting is easy to cut down to custom lengths to suit individual projects. Cutting these strips may seem daunting, but it’s actually far simpler than you would imagine. To make sure you don’t damage your new strip, it is important to use the right tools and follow the correct steps.

Before you start cutting your LED neon flex, you should make sure you have all the necessary materials to hand. This includes a sharp knife or box cutter, end caps, the appropriate connectors and a soldering iron. You’ll also need a tape measure to ensure you don’t over-cut your flex. Once you’ve cut your flex, take some time to scrape away any excess plastic from the ends of each copper dot and then coat them with solder.

Once the dots have been coated in solder, you can close the exposed circuit using an end cap and some silicone sealant. Alternatively, you can add a heat shrink tube to the connection points and those that attach to your power cord for a more durable, weatherproof finish.

Whether you’re creating eye-catching signage or lighting your building facade, a flexible LED neon flex is an ideal alternative to traditional glass tubes. It’s versatile, durable, energy efficient and can be cut to your exact specifications for a bespoke finish.

Leave a Reply

Your email address will not be published. Required fields are marked *